|
|
|
 |
Updated Aug 18 |
Order:
207-796-2187 email:
trevor@rovahfarm.com
Hours Mon, Wed, Fri, 9-4pm and Sat
9-1pm |
| |
Disco I & II - Engine
and Clutch |
|
| |
|
| |
Engine
and Clutch <>
Ignition
<> Gearbox/Transfer Box <>
Axles, Suspension PropShafts<> Steering
<> Brakes
<> Fuel
System, Air Cleaner, Exhaust
<> Cooling/Heating <> Body
Electrical <> Body and Chassis
<> Interior Trim <> Nuts,
Bolts and Screws etc |
| |
|
|
| |
|
|
| |
|
|
| |
T - Piece and Restrictor - OE |
|
| |
Ref: ERR4765 / Price $17.95 |
|
| |
Application: Discovery I
|
|
| |
|
|
| |
Vent - Valve Cover OE |
|
| |
Ref: ERC248 / Price $19.95 |
|
| |
Application: Discovery
1
|
|
| |
|
|
| |
O Ring - Valve Cover Vent |
|
| |
Ref: 564258 / Price $0.99 |
|
| |
Application: Discovery I
|
|
| |
|
|
| |
Starter Motor |
|
| |
Ref: RTC6061N / Price $169.00 |
|
| |
Application: Discovery I and II. This is a new starter
from Prestolite/Unipoint - no core charge
|
|
| |
|
|
| |
Complete Cylinder Head Gasket Set |
|
| |
Ref: STC4082 / Price $109.95 |
|
| |
Application: Rover V8 from MA081992
|
|
| |
|
|
| |
Gasket Set - Bottom End |
|
| |
Ref: STC2823 / Price $38.95 |
|
| |
Application: 3.9 V8 EFI Discovery I, RRC 86 - 94
|
|
| |
|
|
| |
Silicone Rocker Box Gasket |
|
| |
Ref: LVC100260 / Price: $6.99 |
|
| |
Silicon rocker box gasket. Application:
All Rover V8s from 1972 to 2004.
|
|
| |
|
|
| |
Rocker Box Bolt (short) |
|
| |
Ref: ERR7370 / Price $1.90 |
|
| |
Application: Rover V8 (genuine)
|
|
| |
|
|
| |
Rocker Box Bolt (long) |
|
| |
Ref: ERR7371 / Price $1.90 |
|
| |
Application: Rover V8 (genuine)
|
|
| |
|
|
| |
Manifold Valley Gasket - Unipart OE |
|
| |
Ref: LKJ500020G / Price $29.95 |
|
| |
Application: Rover V8 - Teflon Coated
|
|
| |
|
|
| |
Manifold Valley Gasket - Allmakes |
|
| |
Ref: LKJ500020 / Price $19.95 |
|
| |
Application: Rover V8
|
|
| |
|
|
| |
Seal - Inlet manifold (pair) |
|
| |
Ref: ERR7283 / Price $6.99 |
|
| |
Application: Rover V8 (sold in pairs)
|
|
| |
|
|
| |
Cylinder Head Gasket - Elring |
|
| |
Ref: LVB500030G / Price: $26.44 |
|
| |
Original Equipment Manufacturer OEM head gasket
by Elring
Application: 3.9 & 4.0 Discovery I & II, 90 & 110 and RR Classic
Orig part #ERR7627 superseded to ERR5437 which superseded to ERR7217.
Each Gasket has own serial number and instructions for fitting.
|
|
| |
|
|
| |
Cylinder Head Gasket - Allmakes |
|
| |
Ref: LVB500030 / Price: $18.99 |
|
| |
Replacement head gasket from Allmakes. Teflon
coated for superior sealing properties
Application: 3.9 & 4.0 Discovery I & II, 90 & 110 and RR Classic
Orig part #ERR7627 > ERR5437 > ERR7217 superceded to LVB500030.
|
|
| |
|
|
| |
Cylinder Head Valve Stem Oil
Seal |
|
| |
Ref: ERR1782 / Price: $1.89 |
|
| |
Genuine oil seal for cylinder
head valve stems.
Application: NAS Discovery I & II, Defender and Range Rover 4.0 &
4.6
Genuine Land Rover Part
|
|
|
|
| Valve Spring |
|
| Ref: ERR4628 / Price $3.45 |
|
Application: Disco I and Disco II, Range Rover
p38 and Range Rover Classic MY 1996 - 1994, Defender 1987 - 2006. Superceded
from UKC8137L
|
|
|
|
| Hydraulic Lifter/Tappet - OE |
|
| Ref: ERC4949G / Price: $9.99 |
|
| Hydraulic camshaft
tappets (also known as cam followers). These are to original equipment
(OE) specification.
Application: all Rover V8 engines from 1972 to 2004.
|
|
| |
|
| |
Replacement Gasket Exhaust Manifold V8 |
|
| |
Ref: ERR6733 / Price $7.88 |
|
| |
Application: 3.9, 4.0 & 4.6 litre V8 engine.
Discovery 1, Discovery 2, Range Rover Classic 1989 to 1995, Range Rover
2 (38A).
Description: Gasket for 2 ports of exhaust manifold, not handed. 4 per engine.
|
|
| |
|
|
| |
Locking Plate - Exhaust Manifold |
|
| |
Ref: ERC7321 / Price: $2.38 |
|
| |
Washer with locking tabs
Application: Discovery I, 90 & 110 & RR Classic
|
|
| |
|
|
| |
|
Gasket - Exhaust Manifold To Down Pipe |
|
| Ref: ETC4524 / Price: $2.49 |
|
Application: Discovery I & II, 90 &
110 and RR Classic
|
|
|
|
| |
|
Cylinder Head Bolt OE |
|
| Ref: ERR2943G / Price: $2.95 |
|
These are the shorter of the two bolts for
models using the newer 10 bolt pattern, 66mm (2.59") These are (Original
Epuipment) OE bolts
|
|
| |
|
|
|
| Cylinder Head Bolt |
|
| Ref: ERR2944G / Price: $3.95 |
|
These are the longer of the two bolts for
models using the newer 10 bolt pattern, 96mm (3.78") These are (Original
Epuipment) OE bolts
|
|
|
|
| Cylinder Head Bolt Set OE |
|
| Ref: ERR29434SET / Price $59.95 |
|
| Application:
4.0 and 4.6 litre engines from approx 1994 onwards. When only 10 bolts
were used to hold cylinder head to block.
Description: OE bolt set comprising 14x ERR2943 bolt 7/16UNC x 2.6"
(66mm) and 6x ERR2944 bolt 7/16UNC x 3.78" (96mm). One set fixes
both cylinder heads. These are (Original Epuipment) OE bolts.
|
|
|
|
| Sump Gasket V8 |
|
| Ref: 602087 / Price $6.95 |
|
Application: Rover V8 (all)
|
|
|
|
| Gasket - Front Cover |
|
| Ref: ERR7280 / Price $7.83 |
|
Application: Discovery I and II
|
 |
|
|
| Oil Seal - Front Crankshaft |
|
| Ref: ERR6490G / Price $7.45 |
|
Application: Discovery I & Discovery II
|
|
|
|
| Oil Seal - Front Crankshaft |
|
| Ref: ERR6490 / Price $4.95 |
|
Application: Discovery I & Discovery II
- Allmakes 4X4
|
|
|
|
| Oil Seal - Rear Crankshaft - Corteco |
|
| Ref: ERR2640G / Price $11.95 |
|
Application: Defender 1987>, Discovery
Series I 1989 - 1998, Discovery Series II 1998-2004, Range Rover Classic
MY1986 - MY1991, Range Rover Classic MY1992 - MY1994, Range Rover p38
MY1995 - RunOut
|
|
|
|
| Oil Seal - Rear Crankshaft - Allmakes |
|
| Ref: ERR2640 / Price $7.95 |
|
Application: Defender 1987>, Discovery
Series I 1989 - 1998, Discovery Series II 1998-2004, Range Rover Classic
MY1986 - MY1991, Range Rover Classic MY1992 - MY1994, Range Rover p38
MY1995 - RunOut
|
|
|
|
| Seal - Main Bearing Rear Cap Half Joint |
|
| Ref: LUN000010 / Price $1.25 |
|
Application: Defender 1987>, Discovery Series I 1989
- 1998, Discovery Series II 1998-2004, Range Rover p38 MY1995 - RunOut -
2 needed
|
|
|
|
| Engine Mounting Rubber - Allmakes 4X4 |
|
| Ref: KKB103120 / Price $8.99 |
|
Application: Defender '87>, Disco I, Range
Rover Classic MY '92-'94 'Allmakes' S/s from ANR2804
|
|
|
|
| Oil Filter |
|
| Ref: ERR3340D / Price $5.99 |
|
Replacement Coopers oil filter element Z1159
Application:
Discovery I 200TDi, 300TDi and V8.
Approx dimensions: 95mm dia x 106mm long
|
|
|
|
| Oil Filler Cap - Screw on - Genuine |
|
| Ref: 625038 / Price $9.25 |
|
Application: Series (all), Disco I, Defender,
Range Rover Classic
|
|
|
|
| Sump Washer V8 |
|
| Ref: 213961 / $0.91 |
|
| Application: Rover V8, Disco I, Defender
'87> and RR Classic
|
|
|
|
| Air Filter Element |
|
| Ref: ESR1445 / Price $8.49 |
|
| Coopers air filter element AG1103
Application: Range Rover Classic 300TDi, Range Rover Classic 3.9V8 from
MA647645
Approx dimensions: 205mm wide x 280mm long x 57mm deep
|
|
|
|
| Replacement Filter Service Kit |
|
| Ref: FILTERSRANGEV8KIT / Price $27.49 |
|
Replacement filter service kit for Range Rover
Classic MY 1992 -1994 and P38a MY 1995 thru runout.
Kit comprises;
oil filter - Coopers Z1159, air filter - Coopers, fuel filter - Mann WK612/2
and washer for engine sump drain plug.
|
|
|
|
| Clutch Master Cylinder |
|
| Ref: ANR2186 / Price: $92.64 |
|
Application: Range Rover Classic chassis number MA onwards,
Discovery 1 V8 chassis number MA onwards. Discovery 1 North American Specification
from chassis number SA onwards.
Description: Lockheed Delphi LM15976 clutch master cylinder.
Approximate dimensions: overall length including pushrod 237mm (9.33"),
bore 19mm (0.75"), mounting hole centres 58mm (2.28").
|
|
|
|
| Clutch Slave Cylinder |
|
| Ref: FTC5072G / Price: $58.95 |
|
Application: Fits the NAS Discovery 1 V8,
Description: Lockheed Delphi LL15965 clutch slave cylinder.
|
|
|
|
| Slave Cylinder Rebuild Kit - Allmakes |
|
| Ref: STC2818 / Price $6.50 |
|
Application: To rebuild slave cylinder FTC5072G
|
|
|
|
| Clutch Release Bearing |
|
Ref: FTC5200G / Price $22.99 |
|
Application: Early manual NAS Disco I
|
|
|
|
|
|
| |
|
| Engine
and Clutch <>
Ignition
<> Gearbox/Transfer Box <>
Axles, Suspension PropShafts<> Steering
<> Brakes
<> Fuel
System, Air Cleaner, Exhaust
<> Cooling/Heating <> Body
Electrical <> Body and Chassis
<> Interior Trim <> Nuts,
Bolts and Screws etc |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
