Land Rover Parts for Series Defender Discovery Range Rover Freelander


            
  Order: 207-214-6133 or trevor@rovahfarm.com
 

Defender - Axles, Suspension & Steering

Page 2
   
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles, Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Nuts, Bolts and Screw etc.
  Defender - axles, suspension & steering -
Page 1
<> Page 2
 
 
 
     
  Shroud Assy - Steering Column  
  Ref: LR048112 / Price $45.95  
  Application: Defender - Superceded from QRB500160
 
 
  Shroud Assy - Steering Column  
  Ref: MTC3801 / Price $26.95  
  Application: Defender - Lower
 
 
  Steering Column Striker Ring  
  Ref: NRC7636 / Price $29.95  
  Application: Defender - Lower
 
 
  Steering Column 'OE Quality'  
  Ref: QMB101620G / Price $579.00  
  Application: Defender Steering Column to HA906579 - 36 Spline - Superceded from NRC7635
   
 
 
  Steering Wheel Nut 'OE'  
  Ref: QYH500130 / Price $1.65  
  Application: Defender
 
 
  Steering Column Top Support Seal  
  Ref: LR079817 / Price $16.50  
  Application: Defender
 
 
  Clamp - Steering Column Lower  
  Ref: LR016653 / Price $34.95  
  Application: Defender - supereceded from MTC1078
 
 
  Steering Coupling - Upper  
  Ref: NRC7387G / Price $99.67  
  Application: Defender to VA133508
 
 
  Steering Coupling - Upper  
  Ref: NRC7387 / Price $22.95  
  Application: Defender to VA133508
 
 
  Steering Coupling - Lower 'OE Quality'  
  Ref: NRC7704G / Price $99.23  
 

Application: Defender to VA133508

 
 
  Steering Coupling - Lower  
  Ref: NRC7704 / Price $22.95  
 

Application: Defender to VA133508

 
 
 

Steering Coupling - Lower 'OE'

 
  Ref: QLE500020G / Price $98.95  
 

Application: Defender from VA133509

 
 
 

Steering Coupling - Lower

 
  Ref: QLE500020 / Price $39.95  
 

Application: Defender from VA133509

 
 
  Steering Shaft - Assembly 'OE'  
  Ref: RTC4738G / Price $399.00  
 

Application: Defender to VA133508

 
 
  Steering Shaft - Assembly  
  Ref: RTC4738 / Price $145.95  
 

Application: Defender to VA133508

 
 
  Lower Steering Shaft Assembly  
  Ref: QME500031 / Price $104.95  
  Application: Defender from VA133509 - Superceded from QLG100000 and QLC100080
 
 
  Tie Rod - Steering Box  
  Ref: LR041261 / Price $35.95  
  Application: Defender
 
 
  Steering Wheel 17"  
  Ref: QTB502130 / Price $213.00  
  Application: Defender from MA962815 - Deep Grained Plastic - 48 Spline
 
 
  Cover - Steering Wheel  
  Ref: NTC8848 / Price $10.95  
  Application: Defender - Fits Steering Wheel QTB502130
 
 
  Steering Wheel Boss 'Mountney'  
  Ref: DA4661 / Price $59.00  
  Application: Defender 16mm Shaft with 36 Splines. Up to HA and 1A onwards - This is drilled and has a contact plate. Pins on rear are spaced at 38mm and has a flat center. Use with Mountney 3 spoke wheels DA4650 or DA4654
   
 
 
  Steering Wheel Boss 'Mountney'  
  Ref: DA4659 / Price $41.95  
  Application: Defender 16mm Shaft with 36 Splines - Up to HA and 1A onwards.This is not drilled and no contact plate. Pins on rear are spaced at 28mm and center of splines casting has a raised center of 5mm. Use with Mountney 3 spoke wheels DA4650 or DA4654
   
 
 
  Power Steering Hose - LHD - OE  
  Ref: NTC5000 / Price $75.95  
  Application: Defender LHD - 4 cylinder petrol, 2.5NA, and 2.5TD - High Pressure Line
   
   
 
 
  Power Steering Hose - RHD  
  Ref: NTC5001 / Price $76.95  
  Application: Defender RHD , 2.5NA and 2.5TD - High Pressure Line. Also Petrol from HA455945
   
   
 
 
  High Pressure Power Steering Hose - 200TDI - RHD  
  Ref: NTC8193 / Price $144.95  
  Application: Defender 200TDI - Pipe Assembly - Pump to Steering Box - to JA918809 200TDI
   
   
 
 
  High Pressure Power Steering Hose - RHD  
  Ref: NTC9072 / Price $59.95  
  Application: Defender 200TDI - Pipe Assembly - Pump to Steering Box - from JA918810 200TDI
   
   
 
 
  Power Steering Hose - 200TDI  
  Ref: NTC9071 / Price $139.95  
  Application: Defender 200TDI - Low Pressure Hose from Reservoir to Pump
 
 
  Power Steering Hose - 200TDI - LHD  
  Ref: NTC9074 / Price $69.95  
  Application: Defender 200TDI - Pipe Assembly - Pump to Steering Box - To LA939975 200TDI
   
   
 
 
  Power Steering Hose  
  Ref: NTC6070 / Price $51.95  
  Application: Used on Discovery I TDI up to LA081991
   
   
 
 
  Power Steering Hose  
  Ref: ANR6656 / Price $36.95  
  Application: Defender 300TDI LHD - Power Steering Hose. Steering Box to Steering Pump.
 
 
  Power Steering Hose - 300TDI  
  Ref: QEP105760 / Price $59.95  
  Application: Defender 300TDI from XA159807 - Pump to Box
 
 
  Power Steering Hose - 300TDI LHD  
  Ref: QEH102390 / Price $52.95  
  Application: Defender 300TDI box to reservoir - Superceded from ANR6655
 
 
  Power Steering Hose - Box to Reservoir  
  Ref: QEH102380 / Price $48.95  
  Application: Defender 90/110 from JA918810 - superceded from ANR3132.
 
 
  Power Steering Hose  
  Ref: NTC3066 / Price $125.95  
  Application: Defender 90/110 to VIN FA388915 - Reservoir to Pump
 
 
  Power Steering Hose - 300TDI  
  Ref: ANR2485 / Price $19.45  
  Application: Power Steering Reservoir to Pump. LHD and RHD from JA918810
 
 
  Power Steering Hose - 300TDI  
  Ref: ANR2135 / Price $49.95  
  Application: Power Steering Box to Pump. RHD from MA939976 to WA159806
 
 
  Power Steering Hose 300TDI RHD  
  Ref: QEH102460 / Price $59.95  
  Application: Power Steering Box to Reservoir
   
 
 
  Power Steering Hose  
  Ref: NTC8860 / Price $44.95  
  Application: Defender V8 LHD, 200TDI and 2.5NA, Steering Box to Reservoir - Superceded from NTC1683
   
 
 
  Power Steering Hose - OEM  
  Ref: NTC8861 / Price $28.95  
  Application: Defender - Steering Box to Reservoir - From AA244023 to JA918809
 
 
  Steering Hose - TD5 - LHD  
  Ref: QEP105770 / Price $128.95  
  Application: Defender High Pressure Steering Hose - TD5 - LHD
 
 
  O Ring - Power Steering Hose  
  Ref: QYX100280 / Price $1.85  
  Application: Defender Steering Hoses
 
 
  O Ring - Power Steering Hose  
  Ref: RTC4825 / Price $1.25  
  Application: Defender Steering Hoses
 
 
  O Ring - Pump to Steering Box  
  Ref: RTC4826 / Price $0.89  
  Application: Defender Steering
 
 
  Ball Joint Removal Kit  
  Ref: DA1125 / $34.95  
  Application: Defender
 
 
  Steering - Lever Drop Arm - RHD  
  Ref: RTC6398 / Price $56.95  
  Application: Defender - Gemmer Steering Box
 
 
  Steering - Lever Drop Arm - LHD  
  Ref: RTC6399 / Price $56.95  
  Application: Defender - Gemmer Steering Box
 
 
  Steering - Lever Drop Arm - RHD  
  Ref: QFW000020 / Price $59.95  
  Application: Defender. Superceded from STC1044 - Adwest Steering Box - Use castle nut NC112041 and plain washer WC112081L
 
 
  Steering - Lever Drop Arm - LHD - 'OE'  
  Ref: QFW000030G / Price $169.95  
  Application: Defender - Superceded from STC1045 - Adwest Steering Box
 
 
  Steering - Lever Drop Arm - LHD  
  Ref: QFW000030 / Price $59.95  
  Application: Defender - Superceded from STC1045 - Adwest Steering Box - Use castle nut NC112041 and plain washer WC112081L
 
 
  Steering Drop Arm Tab Washer - Gemmer  
  Ref: AEU4025 / Price $5.50  
  Application: Defender 1983> Gemmer Box
 
 
  Steering Drop Arm Lock Washer - Adwest  
  Ref: 600265 / Price $1.45  
  Application: Defender 1983> Adwest Heavyweight and Lightweight Box - 48mm
 
 
  Steering Drop Arm Lock Washer - Adwest  
  Ref: STC874 / Price $2.30  
  Application: Defender 1983> Adwest Heavyweight and Lightweight Box - 60mm
 
 
  Nut - Drop Arm - Gemmer Box  
  Ref: AEU4026 / Price $9.75  
  Application: Defender - Nut - Gemmer Manual and Power Box
 
 
  Nut - Drop Arm - Adwest Box  
  Ref: NH614041 / Price $2.25  
  Application: Defender - Nut - Adwest Heavy Duty 6 Bolt Drop Arm Bolt
 
 
  Nut - Drop Arm - Adwest Box  
  Ref: NT614041L / Price $2.25  
  Application: Defender - Adwest Box
 
 
  Ball Joint Repair Kit - Drop Arm "ADWEST" OE  
  Ref: AEU2761G / Price $45.95  
  Application: Early Defender - Manual (Gemmer) Steering box and early PAS (Adwest heavyweight) box to 243977 RHS and 244542 LHS
 
 
  Ball Joint Repair Kit - Drop Arm  
  Ref: AEU2761 / Price $21.95  
  Application: Early Defender - Manual (Gemmer) Steering box and early PAS (Adwest heavyweight) box to 243977 RHS and 244542 LHS
 
 
  Steering Arm Ball Joint Kit  
  Ref: RBG000010 / $14.95  
  Application: Defender (replaces AEU2761) - Superceded from RTC4198, STC3295
 
 
  Steering Arm Ball Joint Kit  
  Ref: RBG000010G / $89.95  
  Application: Defender (replaces AEU2761) - Superceded from RTC4198, STC3295
 
 
  PAS Belt  
  Ref: ERC5146 / Price $3.99  
  Application: 2.25L and 2.5L Petrol, 2.5NA Diesel, - Power Assisted Steering Belt using the Adwest Pump - Less AC
 
 
  PAS Belt 'DAYCO'  
  Ref: ETC5815G / Price $6.95  
  Application: 2.25L and 2.5L Petrol, 2.5NA Diesel using the Hoburn Eaton Pump - Less AC.
Also 2.5TD, 200TDI - Power Assisted Steering Belt
 
 
  PAS Belt  
  Ref: ETC5815 / Price $3.99  
  Application: 2.25L and 2.5L Petrol, 2.5NA Diesel - using the Hoburn Eaton Pump - Less AC.
Also 2.5TD, 200TDI - Power Assisted Steering Belt
 
 
  Clamp Kit  
  Ref: ZZCLAMPKIT / Price $3.49  
  Application: Series (all), Defender 1987>, Disco I, Range Rover Classic. Kit for rods and ball joints, consisting of one clamp (577898), one bolt (BH604161L, one lock nut (NV604041L) and two washers (WB106041L)
 
 
  Bolt  
  Ref: BH604161L / Price $0.99  
  Application: Series (all), Defender 1987>, Disco I, Range Rover Classic.
 
 
  Washer  
  Ref: WB106041L / Price $0.35  
  Application: Series (all), Defender 1987>, Disco I, Range Rover Classic. (2 required)
 
 
  Lock Nut - Phildas 1/4 UNF  
  Ref: NV604041L / Price $0.45  
  Application: Series (all), Defender 1987>, Disco I, Range Rover Classic.
 
 
  Clamp  
  Ref: 577898 / Price $2.10  
  Application: Series (all)
 
 
  Ball Joint Assembly - "LEMFORDER"  
  Ref: RTC5869G / Price $36.50  
 

Application: Defender 1983 onwards
Description: RH, R/H Thread by 'Lemforder' 1 required for track rod and 1 for cross rod assembly - use castle nut - NC112041


 
 
  Ball Joint Assembly "DELPHI"  
 

Ref: RTC5869D / Price $23.95

 
 

Application: Defender 1983 onwards
Description: RH, R/H Thread by 'Delphi' 1 required for track rod and 1 for cross rod assembly


 
 
  Ball Joint Assembly  
  Ref: RTC5869 / Price $16.95  
 

Application: Defender 1983 onwards
Description: RH, R/H Thread by 'Allmakes' 1 required for track rod and 1 for cross rod assembly - now with greaser!


 
 
  Ball Joint Assembly - "LEMFORDER"  
  Ref: RTC5870G / Price $36.50  
 

Application: Defender 1983 onwards
Description: LH, L/H Thread by 'Lemforder' 1 required for cross rod tube - use castle nut - NC112041


 
 
  Ball Joint Assembly - "DELPHI"  
  Ref: RTC5870D / Price $23.95  
 

Application: Defender 1983 onwards
Description: LH, L/H Thread by 'Delphi' 1 required for cross rod tube


 
 
  Ball Joint Assembly - "ALLMAKES"  
  Ref: RTC5870 / Price $16.95  
 

Application: Defender 1983 onwards
Description: LH, L/H Thread by 'Allmakes' 1 required for cross rod tube


 
 
  Boot - Tie Rod Ball Joint  
  Ref: 214649 / Price $4.15  
  Application: Defender
 
 
  Boot - Large Spring Ring  
  Ref: 214685 / Price $8.25  
  Application: Defender
 
 
  Boot - Small Spring Ring  
  Ref: 90214684 / Price $2.60  
  Application: Defender
 
 
  Eye Cross Rod - RHD  
  Ref: ANR2858 / Price $198.67  
  Application: Defender - Also supercedes from NRC8231
 
 
  Eye Cross Rod - LHD  
  Ref: ANR2859 / Price $130.66  
  Application: Defender - Also supercedes from NRC8232
 
 
  Cross Rod  
  Ref: ANR2860 / Price $34.95  
  Application: Defender (all) 31 1/16"
 
 
  Track Rod  
  Ref: LR045730 / Price $34.95  
  Application: Defender - Superceded from NRC9742
 
 
 
  Track Rod - Complete  
  Ref: LR041267 / Price $49.95  
  Application: Defender 1983 onwards - superceded from NRC9743 - includes track rod, 2 tie rod ends and 2 clamp kits - Rod measures 46 3/16" - Superceded from QFK500040
 
 
  Heavy Duty Steering Arms  
  Ref: DA5502 / Price $199.00  
  Application: Defender 90/110/130 - 3 Track Rod Ends - Solid Heavy Duty Arms which are suitable for off-road use, improves steering response and with a zinc plate finish to increase corrosion resistance.
 
 
  Nut RH - Heavy Duty Steering Arms  
  Ref: DA5528 / Price $2.75  
  Application: Defender 90/110/130 - Replacement Lock Nut RH
 
 
  Nut LH - Heavy Duty Steering Arms  
  Ref: DA5527 / Price $2.75  
  Application: Defender 90/110/130 - Replacement Lock Nut LH
 
 
  Steering Stabilizer  
  Ref: RTC4472 / Price 39.95  
  Application: Defender - 1983 - 2007
 
 
  Steering Stabilizer 'Super Gaz'  
  Ref: DC5004 / Price 69.95  
  Application: Defender - 1983 - 2007
 
 
  Steering Stabilizer - Terrafirma  
  Ref: TF832 / Price $84.95  
  Application: Defender. A tough twin tube design for a large volume of oil for cooler internals and improved protection of working parts. Low pressure nitrogen foam cell for increased performance. 50/50 valve for equal damping lock to lock. 35mm piston, 54mm outer tube and 16mm chromed shaft diameter. Deep silver powder coated finish for great looks.
 
 
  Bush - Steering Stabilizer  
  Ref: NTC1775 / Price $0.95  
  Application: Defender
 
 
  Reservoir - Steering Pump - 'Lemforder'  
  Ref: QFX000030G / Price  
  Application: Defender
 
 
  Reservoir - Steering Pump  
  Ref: QFX000030 / Price $36.95  
  Application: Defender
 
 
  Power Steering Reservoir Bracket 'OE'  
  Ref: QEU500100 / Price $23.75  
  Application: Defender
 
 
  Power Steering Pump  
  Ref: NTC8287 / Price $270.00  
  Application: Defender vin FA389633 to vin JA918387 - 2.5NA, 2.5TD and 200TDI Allmakes or Britpart - Repair Seal Kit STC1633
 
 
  Power Steering Pump - 'Hiflex'  
  Ref: NTC8288 / Price $349.00  
  Application: Defender 200TDI and Discovery 200TDI - Repair Seal Kit STC1633
 
 
  Power Steering Pump  
  Ref: NTC9070 / Price $415.00  
  Application: Defender 2.5L Petrol from June 1992, 2.5L NA from July 1992, 2.5TD from July 1992, 200TDI Defender and Discovery - Repair Seal Kit STC1633
 
 
  Steering Pump V8  
  Ref: QVB101110 / Price $159.95  
  Application: Defender 90 '97' 4.0
 
 
  Steering Pump - 300TDI  
  Ref: ANR2157G / Price $349.95  
  Application: Defender and Discovery 300 TDI - Brazil Manufacture
 
 
  Steering Pump - 300TDI  
  Ref: ANR2157 / Price $149.95  
  Application: Defender and Discovery 300 TDI
 
 
  Steering Pump TD5  
  Ref: QVB101350 / Price $259.00  
  Application: Defender TD5
 
 
  Steering Pump TD5 'OE'  
  Ref: QVB101350G / Price 390.00  
  Application: Defender TD5
 
 
  Steering Pump Re-Seal Kit  
  Ref: STC1633 / Price $1.69  
  Application: Defender - Various Pumps
 
 
  Pulley - Power Steering Pump  
  Ref: ETC5783 / Price $41.95  
  Application: Defender 2.5 Petrol, 2.5NA and 2.5TD
 
 
  Sealing Washer - Steering Pump  
  Ref: RTC5675 / Price $2.95  
  Application: Defender 2.5 Petrol, 2.5NA and 2.5TD
 
 
  Bracket - Steering Pump  
  Ref: ERR2228 / Price $13.95  
  Application: Defender and Discovery 300 TDI
 
 
  Power Steering Box Kit  
  Ref: RTC308 / Price $19.95  
  Application: Adwest Heavyweight Box - 3 bolt top plate
 
 
  Steering Box - Seal Kit 'OE'  
  Ref: STC603 / Price $48.95  
  Application: Defender - 'Gemmer' Lightweight Box
 
 
  Top Cover Plate - Gemmer  
  Ref: AEU4013 / Price $20.95  
  Application: Defender - 'Gemmer' Lightweight Box
   
 
 
  Needle Roller Bearing  
  Ref: STC1055 / Price $11.95  
  Application: Defender Gemmer Box - Top and Bottom of case
 
 
  Steering Box Seal Kit - Adwest Heavyweight  
  Ref: STC889 / Price $13.95  
  Application: Defender - Worm and Valve, Adwest Heavyweight Box

 
 
  Steering Box Seal Kit - Gemmer  
  Ref: RTC5071 / Price $39.95  
  Application: Defender Power Steering Box Seal Kit - Gemmer - 6 bolt top cover type
 
 
  Steering Box Seal Kit - CORTECO  
  Ref: STC2847C / Price $69.95  
  Application: Defender
 
 
  Steering Box Seal Kit  
  Ref: STC2847 / Price $39.00  
  Application: Defender
 
 
  Steering Box Shaft Seal Kit - Corteco 'OE'  
  Ref: STC2848G / Price $17.95  
  Application: Defender use on ADWEST heavyweight and lightweight box - superceded from STC1042
 
 
  Steering Box Shaft Seal Kit  
  Ref: STC2848 / Price $14.50  
  Application: Defender use on ADWEST heavyweight and lightweight box - superceded from STC1042
 
 
 

Steering Box Pipe Assembly RHD

 
  Ref: RTC4400 / Price $34.95  
  Application: Defender RHD
 
 
 

Steering Box Pipe Assembly LHD

 
  Ref: RTC4401 / Price $25.95  
  Application: Defender LHD
 
 
  Steering Box Lock Plate  
  Ref: 572077 / Price $4.40  
  Application: Steering Box Lock Plate - 2 needed

 
 
  Dust Seal - Genuine  
  Ref: LR031509 / Price 16.25  
  Application: Defender (all)
 
 
  Turret - Shock Mounting  
  Ref: NRC6372 / Price $40.95  
  Application: Defender (all)
 
 
  Turret - Galvanized Shock Mounting  
  Ref: NRC6372GALV / Price $59.00  
  Application: Defender (all)
 
 
  Galvanized Turret Kit - Britpart  
  Ref: DA1186 / Price $174.95  
  Application: Defender Front - Includes fittings
 
 
  Shock Mount Towers HD - (PAIR)  
  Ref: DA6323 / Price $159.95  
  Application: Defender 1983>
 
 
  Ring - Fixing Front Spring Turret  
  Ref: RNJ500010 / Price $7.99  
  Application: Defender 1983>, superceded from 572087 - now comes with nuts
 
 
  Ring - HD - Fixing Front Spring Turret  
  Ref: DA6338 / Price $25.95  
  Application: Defender 1983>, comes with flange nuts. Sold as a pair.
 
 
  Front Axle Spring Mount - 40mm Lift - LH  
  Ref: DA4508 / Price $22.95  
  Application: Defender
 
 
  Front Axle Spring Mount - 40mm Lift - RH  
  Ref: DA4509 / Price $22.95  
  Application: Defender
 
 
  Rear Axle Spring Mount - 40mm Lift  
  Ref: DA4518 / Price $14.75  
  Application: Defender
 
 
  Shock Absorber 110 - Front  
  Ref: STC3769 / Price $47.95  
  Application: Defender Front 110 from 1983 - Superceded from RTC4637.
 
 
  Shock Absorber 90 & 110 - Front - Heavy Duty  
  Ref: DA4211 / Price $59.95  
  Application: Defender Front 90 and 110 from 1983 'Britpart'
 
 
  Cellular Dynamic Shock Absorbers  
  Ref: DC6000 / Price $84.95  
  Application: Defender Front 90 & 110 from 1983 - Open/Closed Dimensions - 600/380mm +/- 5mm
 
 
  Shock Absorber 110 - Rear - Heavy Duty  
  Ref: DA4210 / Price $59.95  
  Application: Defender Front 90 and 110 from 1983 'Britpart'
 
 
  Shock Absorber 90 - Rear  
  Ref: STC3767 / Price $47.95  
  Application: Defender 90 - Rear - Superceded from RTC4636, STC289, and STC2852 - 'Armstrong'
 
 
  Shock Absorber 110 - Rear  
  Ref: STC3771 / Price $43.95  
  Application: Defender Rear 110 from 1983 - Superceded from RTC4639 - not for levelled suspension.
 
 
  Cellular Dynamic Shock Absorbers  
  Ref: DC6001 / Price $84.95  
  Application: Defender Rear 110 from 1983 - Open/Closed Dimensions - 590/375mm +/- 5mm
 
 
  Super Gaz - Rear  
  Ref: DC5003 / Price $72.95  
  Application: Defender Rear 90 and 110/130 - Standard Height - Open 590mm / Closed 375mm
 
 
  Super Gaz - Rear  
  Ref: DC5003L / Price $79.00  
  Application: Defender Rear 90 and 110/130 - 50mm / 2 inch Lift - Open 640mm / Closed 400mm
 
 
  Shock Absorber Bush  
  Ref: 552818 / Price $0.75  
  Application: Defender, superceded from 8510240
 
 
  Shock Absorber Retainer  
  Ref: RYF500240 / Price $0.75  
  Application: Defender - Superceded from 500746
 
 
  Washer - Shock Absorber  
  Ref: RYF500200 / Price $0.75  
  Application: Defender - superceded from NRC4365
 
 
  Rear Shocks Retainer Washer - Inner  
  Ref: RYF500210 / Price $2.70  
  Application: Defender 90 and 110 Rear Shocks - Superceded from NRC5602
 
 
  Bush - Damper Upper Rear  
  Ref: NRC5593 / Price $1.35  
  Application: Defender Rear Shock - Upper
 
 
  Rear Shocks Retainer Washer - Outer  
  Ref: RYF500220 / Price $2.55  
  Application: Defender 90 and 110 Rear Shocks - Superceded from NRC5603
 
 
  Rear Lower Washer  
  Ref: RYF500230 / Price $0.65  
  Application: Defender 90 and 110 Rear Shocks - Superceded from ANR1895
 
 
  Cup Washer - Rears  
  Ref: NRC6235 / Price $2.75  
  Application: Defender Shocks - Rears
     
  Shock Absorber Brackets - Rear  
  Ref: DA4515 / Price $45.95  
  Application: Defender - Rear Shock Absorber Brackets - Britpart
 
 
  3 Degree - Heavy Duty Front Radius Arms  
  Ref: DA5505 / Price $520.00  
  Application: Defender - 3 Degree Lift Front Radius Arms from Britpart - Ultra Light - Narrow 38mm - Wide 45mm use DA5506 - Zinc Passivated with heavy duty powder coating to finish - Heavy and oversize - additional freight charges will be added once packed.
 
 
  2" Lift Rear Radius Arms  
  Ref: DA5510 / Price $259.00  
  Application: Defender - 2" Lift Rear Radius Arms from Britpart - Zinc Passivated with heavy duty powder coating to finish - Heavy and oversize - additional freight charges will be added once packed.
 
 
  Front 90 - Drivers Side  
  Ref: NRC9446 / Price $58.95  
  Application: Defender 90" Front Drivers side - 'blue/green' - NAS 90 also.
 
 
  Front 90 - Passengers Side  
  Ref: NRC9447 / Price $66.95  
  Application: Defender 90" Front Passengers side - 'blue/yellow' - NAS 90 also.
 
 
  Rear 90 - Drivers Side - Normal Duty  
  Ref: NRC9448 / Price $66.95  
  Application: Defender 90" Rear Drivers side - 'red/blue' - NAS 90 also. Also fits Drivers Side Front 110 Heavy Duty
 
 
  Rear 90 - Passengers Side - Normal Duty  
  Ref: NRC9449 / Price $66.95  
  Application: Defender 90" Rear Passengers side - 'yellow/white' - NAS 90 also. Also fits Passenger Side Front 110 Heavy Duty
 
 
  Front 110 Coil Spring - Drivers  
  Ref: NRC8044 / $63.95  
  Aplication: Defender 1983 onwards - FRONT - DRIVERS - Note see NRC9448 for Front Heavy Duty Drivers Side
 
 
  Front 110 Coil Spring - Passengers  
  Ref: NRC8045 / $63.95  
  Aplication: Defender 1983 onwards - FRONT - PASSENGERS (Yellow/Yellow) - Note see NRC9449 for Front Heavy Duty Passengers Side
 
 
  Rear 110 Coil Spring - Drivers  
  Ref: NRC6389 / $104.95  
  Aplication: Defender 1983 onwards - REAR - DRIVERS - Red/Red
 
 
  Rear 110 Coil Spring - Passenger  
  Ref: NRC6904 / $99.00  
  Aplication: Passenger 1983 onwards - REAR - PASSENGER - Red/Green
 
 
  Rear 110 Coil Spring - Drivers  
  Ref: NRC6388 / $78.50  
  Aplication: Defender 1983 onwards - REAR - DRIVERS - Note: Fitted on vehicles with levelled supsension - Blue/Blue
 
 
  Rear 110 Coil Spring - Passenger  
  Ref: NRC7000 / Price $84.50  
  Aplication: Passenger 1983 onwards - REAR - PASSENGER - Note: Fitted on vehicles with levelled supsension - Green/White
 
 
  Helper Spring - Rear 110 and 130  
  Ref: RRC3266 / Price $35.95  
  Aplication: Additional inner spring for heavy duty applications - fits D110 and D130
 
 
  Retainer - Helper Spring - Upper  
  Ref: RRC3352 / Price $24.95  
  Aplication: Upper Retaining Plate for helper spring - fits D110 and D130
 
 
  Retainer - Helper Spring - Lower  
  Ref: LR018027 / Price $27.95  
  Aplication: Lower Retaining Plate for helper spring - fits D110 and D130 - Superceded from RRC3355
 
 
  Front Spring Spacers 2" Lift (Pair)  
  Ref: DA6344 / Price $69.00  
  Application: Defender - Front - Made from 6mm Steel Plate and Powder Coated
 
 
  Retainer  
  Ref: NTC6106 / Price $15.95  
  Application: Defender Rear Springs D90
 
 
  Retainer  
  Ref: NRC4318 / Price $6.80  
  Application: Defender Rear Springs 110 and 130
 
 
  Spring Seat - Lower  
  Ref: NRC9700 / Price $12.95  
  Application: Defender 1983> Superceded from 575579 - Front Springs 90 and 110 and Rear Springs D90 to LA939975
 
 
  Spring Seat - Lower - Galvanized  
  Ref: NRC9700GALV / Price $21.95  
  Application: Defender 1983> Superceded from 575579 - Front Springs 90 and 110 and Rear Springs D90 to LA939975
 
 
  Galvanized Fitting Kit - Rear Springs 90  
  Ref: DA1215 / Price $74.95  
  Application: Defender D90 Rear
 
 
  Spring Seat - Lower  
  Ref: NRC4317 / Price $35.50  
 

Application: Defender 1983> Rear Spring Seat 110 and 130


 
 
  Spring Seat - Lower - Galvanized  
  Ref: NRC4317GALV / Price $38.95  
 

Application: Defender 1983> Rear Spring Seat 110 and 130

 
 
  Galvanized Fitting Kit - Rear Springs 110/130  
  Ref: DA1233 / Price $89.95  
  Application: Defender D110/130 Rear
 
 
  Rear Axle Spring Mount - STD  
  Ref: DA4527 / Price $15.88  
  Application: Defender Rear Axle
 
 
  Nyloc Nut 1/2 UNF  
  Ref: NY608041L / Price $0.49  
  Application: Early Defender, bottom of shock to HA475249
 
 
  Shock Mount Bracket - Rear  
  Ref: LR041260 / Price $36.95  
  Application: Discovery I, Defender, Range Rover Classic - Superceded from NRC7981

 
 
  Bolt - M10 X 110  
  Ref: BH110221L / Price $0.99  
  Application: Discovery I, Defender, Range Rover Classic
 
 
  Lower Gaiter - Self Leveling Unit  
  Ref: NRC6561 / Price $10.95  
  Application: Early Defender 110
 
 
  Ball Joint - Self Levelling Unit  
  Ref: 575882 / Price $15.99  
  Application: Defender - Early
 
 
 
 
  Front Bush Kit  
  Ref: DA1244 / Price $34.95  
  Application: Defender up to KA 90 and 110 - Use Bolt Kit DA7202
 
 
  Front Bush Kit 'OE'  
  Ref: DA1244G / Price $77.95  
  Application: Defender up to KA 90 and 110 - Use Bolt Kit DA7202
 
 
  Front Bush Set Bolt Kit  
  Ref: DA7202 / Price $24.50  
  Application: Defender up to KA
 
 
  Front Bush Kit  
  Ref: DA1245 / Price $28.95  
  Application: Defender from LA up to VA130784
 
 
  Front Bush Kit 'OE'  
  Ref: DA1245G / Price $107.95  
  Application: Defender from LA up to VA130784
 
 
  Front Bush Set Bolt Kit  
  Ref: DA7200 / Price $17.95  
  Application: Defender from LA up to VA130784
 
 
  Front Bush Kit  
  Ref: DA1246 / $19.95  
  Application: Defender from VIN # VA130785 to 2A626645
 
 
  Rear Trailing Arm Bush Kit 'OE'  
  Ref: DA1248G / $79.95  
  Application: Defender to 9A768396
 
 
  Rear Trailing Arm Bush Kit  
  Ref: DA1248 / $40.95  
  Application: Defender to 9A768396
 
 
  Rear Bush Set Bolt Kit  
  Ref: DA7201 / Price $25.95  
  Application: Defender up to YA185790
 
 
  FRONT PANHARD ROD  
 
 
 
 
  Bush - Panhard Rod OE  
  Ref: ANR3410G / Price $10.75  
  Application: Defender - Superceded from NRC9728 up to 2A626645
 
 
  Bush - Panhard Rod  
  Ref: ANR3410 / Price $3.75  
  Application: Defender - Superceded from NRC9728 up to 2A626645
 
 
  Panhard Rod Poly Bush Set  
  Ref: ANR3410PY / Price $16.50  
  Application: Defender up to 2A626645
 
 
  Panhard Bush  
  Ref: RBX101340 / Price $5.95  
  Application: Defender from 2A626646
 
 
  Panhard Rod Poly Bush Set  
  Ref: RBX101340 / Price $26.95  
  Application: Defender from 2A626646
 
 
  Bolt - Panhard Bush - M14 X 80  
  Ref: BH114167 / Price $1.95  
  Application: Defender 1983 - 2A626645
 
 
  Nut M14 - Locking - Panhard Rod  
  Ref: NV114047 / Price $1.25  
  Application: Defender
 
 
  Adjustable Panhard Rod  
  Ref: DA1130 / Price $129.00  
  Application: Defender up to 2002 - Use on vehicles with a raised suspension - adjustable panhard rod to correct the axle position which will in turn maintain and restore the steering geometry. Comes with poly bushes.
 
 
 
 
  FRONT RADIUS ARM  
 
 
 
 
  Bush - Three Tube  
  Ref: NTC1774 / Price $9.95  
  Application: Bush - Front Suspension Radius Arm. From 1983 to KA930455 (1994) 'Allmakes' (Alternative to NTC7307) S/s from 576682 - width 1.5 inches.
 
 
  Bush Set Poly - Front Radius Arm  
  Ref: NTC7307PY / Price $39.95  
  Application: Poly Bush Kit - Front Suspension Radius Arm. From 1983 to KA930455 (1994) - width 1.5 inches
 
 
  Bush - 'OE'  
  Ref: NTC7307G / Price $6.95  
  Application: Bush - Front Suspension Radius Arm. From 1983 to KA930455 (1994) - width 1.5 inches
 
 
  Bush  
  Ref: NTC7307 / Price $3.95  
  Application: Bush - Front Suspension Radius Arm From 1983 to KA930455 (1994)
 
 
  Bush - Front Radius Arm - Three Tube  
  Ref: NTC6860G / Price $16.95  
  Application: Defender from LA930456. Front radius arm to axle - 4 required. Width 1.75 inches
 
 
  Bush - Front Radius Arm - Three Tube  
  Ref: NTC6860 / Price $6.75  
  Application: Defender from LA930456. Front radius arm to axle - 4 required. Width 1.75 inches
 
 
  Bush  
  Ref: NTC6781G / Price $16.95  
  Application: Bush - Front Suspension Radius Arm from LA930456 (1995 onwards) - Width 1.75 inches
 
 
  Bush  
  Ref: NTC6781 / Price $5.95  
  Application: Bush - Front Suspension Radius Arm from LA930456 (1995 onwards) - Width 1.75 inches
 
 
  Bolt - 5/8" UNF  
  Ref: BH610281L / Price $1.75  
  Application: Early Defender Radius Arms to KA930434 - Use nut NY610041L
 
 
  Bolt - Dacromet M16 X 100mm  
  Ref : BH116207 / Price $3.75  
  Application: Front Radius Arm, Defender - 4 required from MA939976 to WA159806 - Use nut NY116041L
 
 
  Nut - Locking 5/8" UNF  
  Ref: NY610041L / Price $0.89  
  Application: Early Defender Radius Arms to KA930434
 
 
  Nut - M16 X 1.25 Flanged Nut  
  Ref: ANR3140 / Price $3.60  
  Application: Front Radius Arm, Defender - 4 required from 1A619070
 
 
  Washer Dished - Front Radius Arm  
  Ref: RYF500270 / Price $3.99  
  Application: Discovery I, Defender, Range Rover Classic. Superceded from NRC4515
 
 
  Bush - Front Radius Arm  
  Ref: NRC4514G / Price $5.45 OE Specs  
  Application: Defender to VA130784 OE
 
 
  Bush - Front Radius Arm  
  Ref: NRC4514 / Price $2.95  
  Application: Defender to VA130784 OE
 
 
  Bush Set - Front Radius Arms - Poly  
  Ref: NRC4514PY / Price $21.95  
  Application: Defender to VA130784
 
 
  Bush - Front Radius Arm  
  Ref: ANR6971G / Price $4.95  
  Application: Defender from VA130785
 
 
  Bush - Front Radius Arm  
  Ref: ANR6971 / Price $2.95  
  Application: Defender from VA130785
 
 
  Washer - Front Radius Arm  
  Ref: NRC4516 / Price $6.25  
  Application: Disco I, Defender >2006, Range Rover Classic
 
 
  Nut - Front Radius Arm M20  
  Ref: NY120041L / Price $1.95  
  Application: Disco I, Defender >2006, Range Rover Classic
 
 
 
 
 
  ANTI-ROLL BAR
 
 
 
 
  Anti - Roll Bar - Front  
  Ref: LR033037 / Price $194.95  
  Application: Defender 90, Defender 110 - Fits NAS 90 and 110 superceded from NTC6837 - Extra freight charges may apply.
 
 
  Anti - Roll Bar - Rear  
  Ref: LR033038 / Price $194.95  
  Application: Defender 90, Defender 110 - Fits NAS 90 and 110 superceded from ANR4344 and NRC6221 - Extra freight charges may apply. (note: EGP1889 will not work with this roll bar)
 
 
  Anti-Roll Bar Bracket - Front LH and RH  
  Ref: NTC7667 / Price $32.95  
  Application: Defender
 
 
  Anti-Roll Bar Bracket - Rear RH  
  Ref: ANR4546 / Price $26.95  
  Application: Defender 90
 
 
  Anti-Roll Bar Bracket - Rear LH  
  Ref: ANR4547 / Price $26.95  
  Application: Defender 90
 
 
  Strap - Front Suspension  
  Ref: NTC6776 / Price $10.45  
  Application: Defender Front HD Suspension - Uses bush NTC6828
 
 
  Strap - Rear Suspension D90  
  Ref: ANR4548 / Price $46.95  
  Application: Defender - use with bracket ANR4546 and 7 - Excl TD5
 
 
  Strap - Rear Suspension  
  Ref: 592773 / Price $12.75  
  Application: Defender 110"
 
 
  Strap - Rear Anti Roll Bar  
  Ref: EGP1661L / Price $32.95  
  Application: Defender NAS 1994 - 1997 - Fits rear anti-roll bar - 2 required - Uses Bush EGP1889
 
 
  Tie Bar Mounting Bracket - Single  
  Ref: DA4516 / Price $32.50  
  Application: Defender - Rear Axle
 
 
  Ball Joint - Lemforder OE  
  Ref: NTC1888G / Price $34.95  
  Application: Disco I, Defender, RRC. Fits both front and rear anti-roll bars. 2 required for the front and 2 for the rear anti-roll bar. Locking Nut and Washer not included.
 
 
  Ball Joint  
  Ref: NTC1888 / Price $14.95  
  Application: Disco I, Defender, RRC. Fits both front and rear anti-roll bars. 2 required for the front and 2 for the rear anti-roll bar
 
 
  Bush - Front 'OE'  
  Ref: NTC6828G / Price $9.85  
  Application: Defender 90 and 110. Fits front anti-roll bar - 2 required
 
 
  Bush - Front  
  Ref: NTC6828 / Price $3.00  
  Application: Defender 90 and 110. Fits front anti-roll bar - 2 required
 
 
  Bush - Rear 'OE'  
  Ref: NTC7394G / Price $6.25  
  Application: Defender 90. Fits rear anti-roll bar - 2 required
 
 
  Bush - Rear  
  Ref: NTC7394 / Price $3.30  
  Application: Defender 90. Fits rear anti-roll bar - 2 required
 
 
  Bush - Rear  
  Ref: EGP1889 / Price $4.75  
  Application: Defender NAS 1994 - 1997 - Fits rear anti-roll bar - 2 required - Use Strap EGP1661L
 
 
  Bush - Rear 'OE'  
  Ref: NRC5674LR / Price $10.73  
  Application: Defender 110 1983 - 2010 Fits rear anti-roll bar - 2 required
 
 
  Bush - Rear  
  Ref: NRC5674 / Price $3.95  
  Application: Defender 110 1983 - 2010 Fits rear anti-roll bar - 2 required
 
 
  Shock Absorber Bush "G grade"  
  Ref: 552819G / Price $2.95  
  Application: series (all) 88" front and rear, 109" front - Allmakes
 
 
  Ball Joint Bush  
  Ref: 552819 / Price $1.30  
  Application: Anti-roll bar bush front and rear. 4 required for front and 4 for rear
 
 
  Pin  
 

Ref: RYG501480 / Price $4.60

 
  Application: Disco I, Defender, RRC. Fits front for the 90 and 110 and the rear anti-roll bar for only the 90. 2 required for the front and 2 for the rear anti-roll bar ball joint assembly - Superceded from NTC8202
 
 
  Pin - Rear 110 and 130  
 

Ref: RYG501490 / Price $5.50

 
  Application: Defender. Fits rear anti-roll bars for 110 and 130. 2 for the rear anti-roll bar ball joint assembly - Superceded from NRC6658
 
 
  Washer  
  Ref 264024 / Price $0.75  
  Application: Disco I, Defender (all), Range Rover Classic. Washer for anti-roll bar pin front and rear
 
 
  Lock Nut - M16  
  Ref: NV116041L / Price $1.05  
  Application: Disco I, Defender (all), Range Rover Classic. Lock nut for anti roll bar pin
 
 
  Anti-Roll Bar Kit - Front  
  Ref: ZZANTIROLLKITF / Price $37.95  
  Application: Defender - Fits front anti-roll bar. 1 Kit needed for each anti-roll bar. Kit consists NTC1888(2), NTC6828(2) and 552819(4)
 
 
  Anti-Roll Bar Kit - Rear  
  Ref: ZZANTIROLLKITR / Price $37.45  
  Application: Defender - Fits rear anti-roll bar. 1 Kit needed for each anti-roll bar. Kit consists NTC1888(2), NTC7394(2) D90 or NRC5674 (2) 110, and 552819(4) - Please advise for 90 or 110 - Note Bushings are different for a NAS 90 please advise on ordering.
 
 
 
 
  REAR SUSPENSION UPPER  
 
 
 
 
  Fulcrum Brkt and Ball Joint Assy  
  Ref: DA1129 / Price $99.00  
  Application: Defender, Discovery I, RRC
 
 
  Fulcrum Brkt and Ball Joint Assy  
  Ref: DA1129ULTRA / Price $149.00  
  Application: Defender, Discovery I, RRC - Fulcrum bracket with high articulation.
 
 
  Ball Joint - Rear Suspension Upper - "LEMFORDER"  
  Ref: RHF500110G / Price $53.95  
  Application: Disco I, Defender, RRC. Fits in bracket fulcrum attached to left and right upper link assemblies. This supercedes ANR1799
 
 
  Ball Joint - Rear Suspension Upper - 'Delphi'  
  Ref: RHF500110D / Price $28.95  
  Application: Disco I, Defender, RRC. Fits in bracket fulcrum attached to left and right upper link assemblies. This supercedes ANR1799
 
 
  Ball Joint - Rear Suspension Upper - Allmakes/Britpart  
  Ref: RHF500110 / Price $21.50  
  Application: Disco I, Defender, RRC. Fits in bracket fulcrum attached to left and right upper link assemblies. This supercedes ANR1799
 
 
  Nut - Castle  
  Ref: RYH501090 / Price $5.55  
  Application: Defender, Disco I and RRC - Rear Suspension Ball Joint - superceded from NTC4618
 
 
  Bush - OE  
  Ref: NTC1773G / Price $9.95  
  Application: Disco I, Defender, RRC. bush for link assembly arms - upper rear suspension (2) required
 
 
  Bush  
  Ref: NTC1773 / Price $4.95  
  Application: Disco I, Defender, RRC. bush for link assembly arms - upper rear suspension (2) required
 
 
  Bolt 'OE'  
  Ref: BH612321 / Price $3.40  
  Application: Discovery I, Range Rover Classic and Defender. Use with bush NTC1773 and nut NY612041L (2) required
 
 
  Nut - Nyloc 3/4 UNF 'OE'  
  Ref: NY612041 / Price $0.99  
  Application: Rear Suspension, Top Link Bolt, Disco I, Defender (all), Range Rover Classic (2) required
 
 
  Bolt - 1/2UNF X 6 1/2"  
  Ref: 253952 / Price $3.75  
  Application: Rear Suspension Upper
 
 
  Nyloc Nut 1/2" UNF  
  Ref: NY608042 / Price $0.85  
  Application: Rear Suspension Upper - Superceded from NY608041L
 
 
 
 
  REAR SUSPENSION LOWER  
 
 
 
 
  Nut - Radius Arm  
  Ref: NY120041L / Price $1.95  
  Application: End of Rear Suspension Arm. Disco I, Defender >2006, Range Rover Classic
 
 
  Pair Mounting Rubbers Kit - Rear Suspension Lower  
  Ref: STC618 / Price $26.85  
  Application: Disco I, Defender, RRC. Mounting rubber for lower assembly link on rear suspension (2) required. Superceded from NRC7491
 
 
  Mounting Rubber - Rear Suspension Lower - OE  
  Ref: NTC9027G / Price $19.25  
  Application: Disco I, Defender, RRC. Mounting rubber for lower assembly link on rear suspension (2) required. Superceded from NRC7491
 
 
  Mounting Rubber - Rear Suspension Lower  
  Ref: NTC9027 / Price $12.45  
  Application: Disco I, Defender, RRC. Mounting rubber for lower assembly link on rear suspension (2) required. Superceded from NRC7491
 
 
  Bolt M10 X 30mm  
  Ref: FS110301L / Price $1.59  
  Application: For mounting rubber NTC9027 - 6 required, supercedes from SH110301M
 
 
  Nyloc Nut M10  
  Ref: NY110047L / Price $0.59  
  Application: For mounting rubber NTC9027 - 6 required - superceded from NY110041L
 
 
  Bush - Rear Suspension Lower - OE  
  Ref: NTC1772HD / Price $14.30  
  Application: Disco I, Defender, RRC. Bush for lower assembly link on rear suspension (2) required
 
 
  Bush - Rear Suspension Lower - OE  
  Ref: NTC1772G / Price $12.50  
  Application: Disco I, Defender, RRC. Bush for lower assembly link on rear suspension (2) required
 
 
  Bush - Rear Suspension Lower  
  Ref: NTC1772 / Price $4.55  
  Application: Disco I, Defender, RRC. Bush for lower assembly link on rear suspension (2) required
 
 
  Bolt - Rear Suspension Lower  
  Ref: BH610321L / Price $2.95  
  Application: Defender. Use with bush NTC1772 for lower assembly link
 
 
  Nut - Nyloc 5/8 UNF  
  Ref: NY610041L / Price $0.89  
  Application: Defender. Use with bush NTC1772 for lower assembly link
 
 
  Lower Link Assy  
  Ref: NTC8328 / Price $$69.95  
  Application: Defender - Includes Bush NTC1772
 
 
  Bump Stop - Front  
  Ref: ANR4188EYELLOW / Price $48.00  
  Application: Defender - Extended Height 80mm High - Polyurethane
 
 
  Bump Stop - Front  
  Ref: ANR4188PYE / Price $43.75  
  Application: Defender - Extended Height 80mm High - Polyurethane
 
 
  Bump Stop - Front  
  Ref: ANR4188G / Price $12.69  
  Application: Defender - superceded from 575707
 
 
  Bump Stop - Front  
  Ref: ANR4188 / Price $9.95  
  Application: Defender - superceded from 575707
 
 
  Bump Stop - Rebound Rear  
  Ref: ANR2991 / Price $6.75  
  Application: Defender, superceded from 90575789 to TA970049
 
 
  Bump Stop - Rear  
  Ref: ANR4189PYE / Price $44.75  
  Application: Defender - Extended Height 80mm High - Polyurethane
 
 
  Bump Stop - Rebound Rear  
  Ref: ANR4189 / Price $10.85  
  Application: Defender, from TA970050
 
 
 
 
  Differential Wheel & Pinion Kit - Matched Set - Britpart  
  Ref: STC1768 / Price $225.00  
  Application: Defender
STC1768 is superceded from STC851 which is superceded from RTC4486
 
 
  Differential Wheel & Pinion Kit - Salisbury Axle - Allmakes  
  Ref: RTC4488 / Price $364.95  
  Application: Salisbury Axle - Series and Defender
 
 
  Salisbury Pinion Gear  
  Ref: 607167 / Price $52.40  
  Application: Salisbury Axle - Series and Defender
 
 
  Salisbury Thrust Washer  
  Ref: 607168 / Price $6.95  
  Application: Salisbury Axle - Series and Defender
 
 
  Salisbury Thrust Washer  
  Ref: 607169 / Price $4.70  
  Application: Salisbury Axle - Series and Defender
 
 
  Cross Shaft - Differential  
  Ref: 599945 / Price $12.15  
  Application: Defender
 
 
  Spring Pin  
  Ref: 576159 / Price $0.75  
  Application: Rover Differential - For the differential locking ring on the carrier bearings.
 
 
  Circlip - Cross Shaft  
  Ref: CCN110L / Price $0.49  
  Application: Defender
 
 
  Carrier Bearing - Rover Axle - Timken  
  Ref: RTC2726G / Price $23.45  
  Application: Defender 2 pinion to LA930455
 
 
  Carrier Bearing - Rover Axle  
  Ref: RTC2726 / Price $19.45  
  Application: Defender 2 pinion to LA930455
 
 
  Bearing - Differential Carrier - Timken  
  Ref: RTC3095G / Price $20.95  
  Application: Defender 2 pinion from LA930456 - and 4 pinion 90 onwards - Superceded from STC1602
 
 
  Differential Pinion Inner Bearing - Timken  
  Ref: 539706T / Price $59.95  
  Application: Defender Front and Rear 90, 110 Front Diff - Timken
 
 
  Differential Pinion Inner Bearing  
  Ref: 539706 / Price $26.30  
  Application: Defender Front and Rear 90. 110 Diff
 
 
  Shim Final Drive - 0.040"  
  Ref: 549232 / Price $10.50  
  Application: Defender Front and Rear 90 Diff to KA930465 - Imperial shims
 
 
  Shim Final Drive - 0.042"  
  Ref: 549234 / Price $12.95  
  Application: Defender Front and Rear 90 Diff to KA930465 - Imperial shims
 
 
  Shim Final Drive - 0.044"  
  Ref: 549236 / Price $15.25  
  Application: Defender Front and Rear 90 Diff to KA930465 - Imperial shims
 
 
  Shim Final Drive - 0.046"  
  Ref: 549238 / Price $5.95  
  Application: Defender Front and Rear 90 Diff to KA930465 - Imperial shims
 
 
  Diff Pinion Outer Bearing - Timken  
  Ref: 539707G / Price $33.95  
  Application: Defender Front and Rear 90 and Front 110 Rover Diff - Timken
 
 
  Diff Spacer 'OE'  
  Ref: 539745 / Price $10.50  
  Application: Defender Front and Rear 90 and Front 110 Rover Diff
 
 
 
 
  SALISBURY AXLE  
 
 
  Carrier Bearing - Salisbury Axle  
  Ref: 607187T / Price $67.23  
  Application: Series and Defender Salisbury axle - Timken bearing
 
 
  Carrier Bearing - Salisbury Axle  
  Ref: 607187 / Price $29.95  
  Application: Series and Defender Salisbury axle
 
 
  Carrier Shim - Salisbury Axle 0.003"  
  Ref: 607188 / Price $2.75  
  Application: Series and Defender Salisbury axle
 
 
  Carrier Shim - Salisbury Axle 0.005"  
  Ref: 607189 / Price $2.75  
  Application: Series and Defender Salisbury axle
 
 
  Carrier Shim - Salisbury Axle 0.010"  
  Ref: 607190 / Price $2.75  
  Application: Series and Defender Salisbury axle
 
 
  Carrier Shim - Salisbury Axle 0.030"  
  Ref: 607191 / Price $2.75  
  Application: Series and Defender Salisbury axle
 
 
  Pinion Bearing Inner - Salisbury Axle  
  Ref: 607180G / Price $52.42  
  Application: Series and Defender Salisbury axle - Timken bearing
 
 
  Pinion Bearing Inner - Salisbury Axle  
  Ref: 607180 / Price $26.50  
  Application: Series and Defender Salisbury axle - 'DPI' bearing
 
 
  Pinion Bearing Outer - Salisbury Axle  
  Ref: 607181G / Price $37.50  
  Application: Series and Defender Salisbury axle - Timken bearing
 
 
  Pinion Bearing Outer - Salisbury Axle  
  Ref: 607181 / Price $22.95  
  Application: Series and Defender Salisbury axle - Allmakes NIS bearing
 
 
  Pinion Oil Seal - Corteco  
  Ref FRC4586G / Price $9.95  
  Application: Defender 1983 > up to axle # 20L13358B - RHS, and 20L10631B - LHS, and to VIN KA930455
 
 
  Pinion Oil Seal - Allmakes  
  Ref FRC4586 / Price $3.95  
  Application: Defender 1983 > up to axle # 20L13358B - RHS, and 20L10631B - LHS and to VIN KA930455
 
 
  Pinion Seal - Differential  
  Ref: FRC8220G / Price $12.95  
  Application: Defender from axle 20L13359B - RHS and 21L10632B - LHS to VA102732

 
 
  Pinion Seal - Differential  
  Ref: FRC8220 / Price $2.50  
  Application: Defender from axle 20L13359B - RHS and 21L10632B - LHS to VA102732

 
 
  Pinion Seal - Differential OE  
  Ref: FTC5258G / Price $9.75  
  Application: Defender, OE Seal from VA102733

 
 
  Pinion Seal - Differential  
  Ref: FTC5258 / Price $2.95  
  Application: Defender from VA102733

 
 
  Flange - Differential  
  Ref: 236632 / Price $19.95  
  Application: Early Defender - Differential Flange - 4 spline
 
 
  Spacer - Collapsible  
  Ref: 607197 / Price $11.90  
  Application: Defender Salisbury
 
 
  Gasket - Pinion Oil Seal - Salisbury  
  Ref: 607183 / Price $2.25  
  Application: Defender Salisbury Axle
Description: O/D 4 1/8" I/D 2 3/4"
 
 
  Pinion Oil Seal Salisbury Axle  
  Ref: AEU2515 / Price $7.46  
  Application: Rear casing 110/130" Salisbury Axle, Defender to WA159806
Description: Metal and Leather pinion oil seal. Outer diameter 3 1/8" inner 2''
 
 
  Pinion Oil Seal Salisbury Axle - Rubber  
  Ref: AEU2515R / Price $5.95  
  Application: Rear casing 110/130" Salisbury Axle, Defender to WA159806
Description: Metal and Rubber pinion oil seal. Outer diameter 3 1/8" inner 2''
 
 
  Pinion Oil Seal Salisbury Axle 'NITRILE'  
  Ref: STC4401 / Price $6.95  
  Application: Pinion Seal Salisbury Axle, Defender from XA159807

 
 
  Differential Flange - Mud Shield - Front  
  Ref: LR017552 / Price $1.95  
  Application: Defender 2007 onwards
 
 
  Flange Kit - Salisbury Axle  
 

Ref: STC4403 / Price $97.90

 
  Application: Defender: Salisbury Differential
 
 
  Flange - Salisbury Differential  
  Ref: 607185 / Price $49.95  
  Application: Defender: Salisbury Differential
 
 
  Kit - Flange - Four Bolt - 'OE'  
  Ref: STC4858 / Price $59.95  
  Application: Defender Front and Rear Differential Flange -not Salisbury - Superceded from FRC3002, FTC5322 and STC3722 - 24 spline

 
 
  Transfer Box Output Flange Kit - Front - LT230  
  Ref: STC3432 / Price $44.95  
  Application: Defender from
(T) 22D526135F and (T) 32D526135F
 
 
  Felt Washer Output Flange - LT230  
  Ref: FRC2464 / Price $0.49  
  Application: Defender
 
 
  Washer - Salisbury  
  Ref: 607357GEN / Price $8.25  
  Application: Salisbury Axle - Washer for flange nut
 
 
  Pinion Locknut - Salisbury  
  Ref: 90608545 / Price $19.50  
  Application: Series Salisbury Axle
 
 
  Differential Stud - Axle Case  
  Ref: 561195 / Price $1.40  
  Application: Axle Case to Differential - not Salisbury - 3/8 UNF X 1 1/4"
 
 
  Differential Stud  
  Ref: 561196 / Price $1.52  
  Application: Axle Case to Differential - not Salisbury - 3/8 UNF X 1 3/4"
 
 
  Drain / Fill Plug  
  Ref: 608246 / Price $7.40  
  Application: Defender
 
 
  Drain Plug Magnetic  
  Ref: TYB500120 / Price $11.49  
  Application: Defender
 
 
  Differential Cover - Front  
  Ref: DA1043 / Price $74.95  
  Application: Defender 90, 110
 
 
  Differential Cover - Rear  
  Ref: DA1044 / Price $74.95  
  Application: Defender 90, 110
 
 
  Differential Gasket  
  Ref: 7316 / Price $1.99  
  Application: Series (all), Defender (all), Disco I >'98, Range Rover Classic MY '86-'91 & MY '92-'94
 
 
  Salisbury Differential Cover  
  Ref: RTC844 / Price $142.95  
  Application: Series
 
 
  ARB Salisbury Differential Cover  
  Ref: DA8934 / Price $295.00  
  Application: Defender - High Tensile Bolts Supplied. Magnets on dipstick and fill plug
 
 
  ARB Salisbury Differential Cover  
  Ref: DA8926 / Price $300.00  
  Application: Defender - High Tensile Bolts Supplied. Magnets on dipstick and fill plug
 
 
  Differential Gasket - Salisbury  
  Ref: RTC1139 / Price $2.95  
  Application: Series with Salisbury rear axle and Defender 1987>
 
 
  Differential Guard  
  Ref: DA2250B / Price $49.95  
  Application: Defender Rover Axle - Double Bolt Clamp
 
 
  Differential Guard - Galvanized  
  Ref: DA2250GALV / Price $59.95  
  Application: Defender Rover Axle - Double Bolt Clamp
 
 
  Front Axle Breather Tube  
  Ref: FTC2175 / Price $36.75  
  Application: Defender - length 74" approx
   
 
 
  Rear Axle Breather Tube  
  Ref: FTC2176 / $31.95  
  Application: Defender - length 36.5" approx
 
 
  Ref: 595478G / Price $7.95  
  Application: Defender
 
 
 
 
     
  Defender- axles, suspension & steering -
Page 1
<> Page 2
 
     
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles, Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Nuts, Bolts and Screw etc.